Functional Scale RC Car Parachute Kit for DR10 Drag Car/Slash 2wd, 4wd Speed Run

Description

Scroll to bottom for Instruction Manual & Parts List
All Parachutes now come with QR Code instructions in the box
Look up "
AJC Mods Functional RC Car Parachute Testing" Video on Youtube to see it in action!
Look up "How To Assemble The AJCMods RC Car Parachute Kit" Video on Youtube for an assembly guide.
AJCMods
3D Printed Fully Functional RC Parachute Kit for 1/10-1/5 RC Drag Cars & Speed Run Cars! After weeks of testing and prototyping we are proud to introduce our spring loaded, servo actuated, full function parachute kit in 6 different configurations to suit your ride. This parachute kit helps slow down your RC at the end of a high speed run. Designed to be used in conjunction with normal ESC/Motor braking and operates from a 3rd Channel TX/RX(NOT the stock 2 channel equipment). Conventional electronic braking heats up the motor quickly and can cause the car to become unstable and spin out - this parachute kit improves braking stability and helps slow down the car by introducing wind drag, and LOOKS GREAT doing it. A properly packed parachute will fully deploy in 0.5 seconds or less at speed as it is shot out from the spring loaded barrel and instantly starts to unravel and deploy. This parachute "barrel" is designed to mount on the rear of the body, and the actual parachute attachment varies depending on setup (see below)
Read Before Use:
Attaching The Parachute
Where you mount the parachute will vary depending on the make and model of your car, the add-ons, center of gravity, weight, body type, and track conditions. A general rule of thumb is you want the parachute line to be on the same level as the top of your tires when the parachute is pulled outward parallel to the ground. On the DR10 for example, this line is achieved by mounting the parachute just below the rear wing, using the center wing bolt and a zip tie as a securement point. Use the provided carabiners, clips, zip ties, and/or keychain ring to fine tune your mounting point.
Important
info on the Parachute Choke
Adjusting the choke is very important! Use the provided red or black shrink wrap as the choke. The choke needs to be adjusted based on how you want the parachute to function; if you want to use the chute on nearly every run as an aid to slowing down, bring the choke along the strings to nearly the end of the parachute, leaving just 3-4" of string exposed before the parachute begins. This will allow the parachute to open more gradually resulting in a smoother transition of force to the car and more stable deceleration. For faster trap speeds simply bring the choke higher and higher, up to just 1" of exposed string before the parachute. If you want to use the parachute for emergency situations only, to avoid hitting obstacles such as a wall or a parked car, adjust the choke to about half way up the string - this will make the parachute deploy quicker and will stop the car faster, but may lead to a rollover or abrupt/disrupted stop.
Resistance Data
17"
Speed
20 MPH
30 MPH
40 MPH
50 MPH
60 MPH
Lb Pull
0.5
1
2
3
4
24"
Speed
20 MPH
30 MPH
40 MPH
50 MPH
60 MPH
Lb Pull
4
5.5
9.5
16
24
30"
Speed
20 MPH
30 MPH
40 MPH
50 MPH
60 MPH
Lb Pull
5
7
12
20
30
NOTE:
This kit is designed to work with 3 or more channel transmitters as a 3rd channel switch is needed to activate the servo, this means the stock DR10 transmitter and any other cheap 2-channel transmitters WILL NOT work with this parachute kit. We can bundle these with a FlySky GT3B Transmitter & Receiver for extra.
Check out our other RC Drag upgrades on our website and
here on eBay
3D Printed Parts Included:
1x -
Parachute Barrel
1x -
Barrel  Door
1x -
Plunger
1x -
Plunger Stop
1x -
Servo Cover
1x -
Servo Arm/Horn
Hardware/Parts Included
:
1x -
M3x18mm Flat Head - Plunger Stop
4x -
M3x14mm Flat Head - Body Mount Plate
2x -
M3x12mm Flat Head - Servo Cover
2x -
M2x8mm Button Head - Parachute Door Hinge
1x -
Carabiner - Chassis Clip for Parachute Cord
1x -
Parachute
1x -
Cord Sheath (Heat Shrink)
1x -
Servo 3 Wire Extension
1x -
Plunger Spring
1x -
Metal Gear Servo
Optional Parts Included:
1x -
6 String Choke for Parachute Cords
1x -
8 String Choke for Parachute Cords